ICS 695XL-GC Concrete-Cutting Gas Chain Saw

desertdiamondindustries-info-iconICS chainsaw for concrete, masonry, and stone. Makes square cuts up to full length of guide bar (up to 16", depending on guidebar).

The ICS 695XL-GC Concrete-Cutting Gas Chain Saw comes with a 12", 14", or 16" guidebar and TwinMAX chain, which is designed for everday cutting In natural stone, medium concrete, and reinforced concrete with light reinforcement.

Financing available ($1,000 minimum purchase)

ICS 695XL-GC Concrete-Cutting Gas Chain Saw

The ICS 695XL-GC Concrete-Cutting Gas Chain Saw is a durable saw that is easy to start and that provides more power than the ICS 680ES Concrete-Cutting Gas Chain Saw.

The ICS 695XL-GC Concrete Cutting Chain saw is designed for more frequent heavy duty use. Great for concrete window and door openings, curb cutouts, ventilation holes and even foundation work. Cuts right corners without overcutting. This is the kind of tool that allows you to diversify your bidding process and tackle jobs most contractors wouldn’t even consider.

The ICS 695XL-GC Concrete-Cutting Gas Chain Saw comes with a TwinMAX guidebar and one 12", 14" or 16" TwinMAX chain, which is designed for everday cutting on natural stone, medium concrete and concrete with light reinforcement. For more chains and guidebars, visit our ICS chain saw chains page and ICS chain saw guidebars page.

 


 

Related Products

ICS 695XL-GC Concrete-Cutting Gas Chain Saw Benefits

  • Deeper Cuts: The ICS 695XL-GC Concrete-Cutting Gas Chain Saw can cut up to the full length of its guide bar. That can be up to three times the cutting depth of hand-held rotary saws with the same blade size.
  • Less Overcutting: The ICS 695XL-GC Concrete-Cutting Gas Chain Saw lets you make square cuts up to full length of its guide bar and can reduce excavation needed to get at pipes.
  • Durable: The ICS 695XL-GC Concrete-Cutting Gas Chain Saw is desgined for frequent use in general construction, utility and conctact work.
  • Safer to Operate: The ICS 695XL-GC Concrete-Cutting Gas Chain Saw has no gyroscopic motion.
  • Designed for Wet Cutting: With the ICS 695XL-GC Concrete-Cutting Gas Chain Saw's rear-ported air intake and polyester air filter.
  • Easier Chain Assembly: With the ICS 695XL-GC Concrete-Cutting Gas Chain Saw's extended drive sprocket adapter.
  • Easier Tensioning: With the ICS 695XL-GC Concrete-Cutting Gas Chain Saw's oversized tensioner screw.

ICS 695XL-GC Concrete-Cutting Gas Chain Saw Specifications

  • Weight without Bar and Chain: 21 pounds
  • Bar Length: Up to 16"
  • Horsepower: 6.4 HP @ 9000 rpm
  • Engine: 2-stroke, single cylinder, air cooled
  • Displacement: 94 cc
  • Powerhead: 18" X 14" X 12"
  • Guaranteed Sound Power Level: 115 dB(A)
  • Equivalent Sound Pressure Level at Operator's Ear: 104.6 dB(A)
  • Vibration Level (Concrete-Cutting): 3.6 m/s2(front handle), 3.1 m/s2 (rear handle)
  • Water Supply: Minimum 20 psi (1.5 bar)
  • Fuel Mix Ratio: 25:1 (4%) fuel-to-oil
  • Fuel Capacity: 0.26 gal

ICS 695XL-GC Concrete-Cutting Gas Chain Saws Are Designed For:

  • Reinforced concrete.
  • Demolition.
  • Pipe cutting.
  • Underground utility work.
  • Cutting window and door openings.
  • Cutting 12" to 16" deep in one pass.

Who Uses the ICS 695XL-GC Concrete-Cutting Gas Chain Saw?

  • Demolition contractors.
  • Heavy construction companies.
  • Masonry and landscaping contractors.
  • Utility contractors.
  • City and state water companies and authorities.

Available ICS 695XL-GC Concrete-Cutting Gas Chain Saw Chains

  • TwinMAX: Natural stone, medium concrete, concrete with light reinforcement.
  • TwinMax Plus: Natural stone, medium or hard concrete, concrete with light or heavy reinforcement. For harder materials.
  • TwinMAX Abrasive: Soft or abrasive materials, soft stone, brick. For softer and/or abrasive materials.