ICS 890F4 Concrete-Cutting Hydraulic Chain Saw

desertdiamondindustries-info-iconMakes square cuts up to the full length of its guide bar (up to 25", depending on guidebar). Hydraulic power pack (sold separately) reduces saw noise and fumes; it can even cut while submerged!.

The ICS 890F4 Concrete Cutting Hydraulic Chainsaw comes with one 15" guidebar and ProFORCE chain, which is designe for general purpose cutting in stone, medium and heavy concrete, and reinforced concrete with light or heavy reinforcement.

Financing available ($1,000 minimum purchase)

ICS 890F4 Concrete-Cutting Hydraulic Chainsaw

Do you need a deep-cutting saw for stone and reinforced concrete? Then you need the ICS 890F4 Concrete-Cutting Hydraulic Chainsaw.

Not only can the ICS 890F4 Concrete-Cutting Hydraulic Chainsaw cut right-angled corners without overcutting,but it can also cut up to the full length of its guidebar (up to 25"). What's more, its hydraulic power pack (sold separately) reduces noise and emissions and lets you cut in places you never could before. It even cuts when submerged! Great for window and door openings, curb cutouts, ventilation holes, foundation work, and more.

The ICS 890F4 Concrete-Cutting Hydraulic Chainsaw comes with one 15" FORCE4 guidebar and one 15" ProFORCE chain for natural stone, medium and heavy concrete, and reinforced concrete with light or heavy reinforcement. Available with either 1' or 8' hose whips.

Need to cut ductile iron, cast iron, PVC, HDPE, or Insituform pipe lining? Take a look at the ICS 890PG Ductile Iron Pipe-Cutting Hydraulic Chainsaw with PowerGrit chain.

For more chains and guidebars, visit our ICS chainsaw chains page and ICS chainsaw guidebars page.

You need an ICS hydraulic chainsaw power pack and ICS hydraulic hoses in order to use the ICS 890F4 Concrete Cutting Hydraulic Chainsaw!

ICS-890F4-At-WorkThe ICS 890F4 Concrete-Cutting Hydraulic Chain Saw cuts masonry, brick, reinforced concrete, and stone up to 25" deep (depending on guidebar). Its separate hydraulic power pack (sold separately) reduces fumes and noise during cutting; you can even cut underwater with it!

 

 

 

 


 

ICS 890F4 Concrete-Cutting Hydraulic Chainsaw Benefits

  • Deeper Cuts: The ICS 890F4 Concrete-Cutting Hydraulic Chainsaw makes square cuts up to the full length of its guidebar. This can be up to three times the cutting depth of hand-held rotary saws with the same blade size and can reduce excavation needed to get at buried pipes and conduits.
  • External Hydraulic Power Pack: The ICS 890F4 Concrete-Cutting Hydraulic Chainsaw's external hydraulic power pack (sold sepasrately) reduces emissions and noise.
  • >Made for the Field: The ICS 890F4 Concrete-Cutting Hydraulic Chainsaw's handle is tougher and has been ergonomically designed to improve operator comfort. Its drive sprocket has been designed for quick field replacements.
  • More Accurate: The ICS 890F4 Concrete-Cutting Hydraulic Chainsaw comes with three scratch-resistant bubble levels, so that your cut is level the first time.
  • Saves Water: With the ICS 890F4 Concrete-Cutting Hydraulic Chainsaw's secondary water shut-off valve.

ICS 890F4 Concrete-Cutting Hydraulic Chainsaw Specifications

  • Weight: 27.3 pounds (with 15" bar and chain)
  • Bar Length: Up to 25"
  • Horsepower: 11.5 HP (8 gallons-per-minute) or 17.5 HP (12 gallons-per-minute)
  • Motor: 2,500 PSI
  • Powerhead: 23" X 10.5" X 9.5"
  • Sound Pressure Level: 98 dB @ 3' (1 m)
  • Sound Power Level: 107 dB @ 3' (1 m)
  • Vibration Level: 2 m/s2 at front handle, 6 m/s2 at rear handle
  • Water Supply: Minimum 20 PSI (1.5 bar)

Hydraulic Power Packs Sold Separately

ICS 890F4 Concrete-Cutting Hydraulic Chainsaws Are Designed For:

  • Stone and abrasive stone.
  • Medium and hard concrete.
  • Brick, block, and masonry.
  • Reinforced concrete with light and heavy reinforcement.
  • Cutting while submerged.
  • Cutting window and door openings.
  • Cutting up to 25" deep in one pass.
  • >Areas where air quality is a concern (indoors, sewers, etc.).
  • Areas where noise is a concern (indoors, residential areas, etc.).

Who Uses the ICS 890F4 Concrete-Cutting Hydraulic Chainsaw?

  • Concrete contractors.
  • Water and utility companies.
  • Professional concrete cutters.
  • Demolition companies.

Available ICS 890F4 Concrete-Cutting Gas Chain Saw Chains

  • ProFORCE: Natural stone, medium or hard concrete, concrete with light or heavy reinforcement.
  • ProFORCE L: Natural stone, medium or hard concrete, concrete with light or heavy reinforcement. Longer lasting
  • ProFORCE S: Medium or hard concrete, concrete with light or heavy reinforcement. Faster cutting speed.
  • ProFORCE Abrasive: Soft or abrasive materials, soft stone, brick.
Related Products